Substrate Preparation is the key to achieving a perfect resin floor finish.
Epoxy primers can be applied as a first, subfloor penetrating coat, and prior to the installation of the resin system. Primers are applied in a number of ways, by using rollers, trowels, or squeegee.
All the substrates must be well prepared prior to the primer application.
EP20-M Prime is a 2-component, solvent-free, epoxy resin primer and scratch coat. It is mainly used as a primer for decorative systems like metallic and 3D flooring, or for polyurethane resin systems.EP 20-M Epoxy Primer can be used as a bonding layer for most of our resin flooring systems.UsageSuitable for use as a low viscosity epoxy primer on cement and plaster bonded substrates. EP20-M Prime can be applied to weak and porous substrates creating a high strength substrate prior to the appl..
EP20 Prime is a 2-component, solvent-free, general purpose epoxy resin primer and scratch coat. The epoxy primer is suitable for most epoxy and polyurethane resin systems. It can also be applied in combination with microcement systems. Usage Suitable for use as a low viscosity primer on cement and plaster bonded substrates. EP20 Prime can be applied to weak and porous substrates creating a high strength substrate prior to the application of the Toppus Group ..
Neoprene Primer - general purpose water-based primer for dusty or absorbent surfaces to promote adhesion and to prevent rapid drying of adhesive and smoothing underlayments. It is mainly applied under levelling compounds and monocomponent micro cement flooring systems. For use on absorbent surfaces such as concrete, sand/cement and synthetic anhydrite screeds; plywood, hardboard and chipboard.Suitable to be applied on top of Underfloor Heating. The primer comes in a green colour whic..
Rapid Set EP22 Epoxy primer 1 kg is a fast set primer suitable for most resin systems when a rapid curing priming of the surface is required. The small tins of fast set primer will allow you to repair the floor locally in less than 3 hours prior to applying the primer all over the floor. It is ready for subsequent coatings in about 2-3 hours at 20 °C/ 68 °F.*Usage EP22 Fast Set Epoxy Primer is a high quality, Rapid Curing, solvent-free, 2 component cl..
RS EP22 is a fast set epoxy primer suitable for most resin systems when a rapid curing priming of the surface is required. Using RS EP22 allows you to install two layers of epoxy coating in one day. RS EP22 rapid set primer is ready for subsequent coatings in about 2-3 hours at 20 °C/ 68 °F.*Suitable to be applied as a bonding layer for most of our resin flooring systems.Usage EP22 Fast Set Epoxy Primer is a high quality, Rapid Curing, solvent free, 2 component..
Strongcoat Primer is a cost effective two-pack solvent free, epoxy based primer for use as a base for most epoxy and polyurethane systems. It can also be used as a base on weak substrates when a levelling compound needs to be installed.*Strongcoat Primer is applied by brush, roller or squeegee in one or two coats depending on the texture, porosity, and evenness of the surface being primed. UsageSuitable for use as a low viscosity epoxy primer on cement and plaster bonded substrates. St..
EP 27 Damp Proof Primer is a 2-component, high quality moisture resistant, solvent-free, low-emission, used as an epoxy primer or scratch coat prior to applying resin flooring finishes, microcement or self smoothing compounds.Suitable to be applied as a bonding layer if moisture or vapour pressure is present in the substrate. UsageEpoxy DPM Primer use as a medium viscosity moisture resistant primer or scratch coat on cement and plaster bonded substrates. EP27 Prime can be applied to weak ..