Standard Pin Leveller 58 cm/ 23"

Spiked Aeration Roller with 11 mm Flexible Spikes is made of a high quality solvent-resistant polypropylene, for Ø 8 mm handle.It is used to release air bubbles from epoxy and polyurethane coatings and self-smoothing compounds. FeaturesLength: 25 cm (10")Spikes: 11 mm (0.43")Solvent ResistantMaterial: PolypropyleneFlexiblePremium QualityWithout Handle - for Ø 8 mm handleHandle Required: Roller Handle Ø 8 mm for 25 cm Rollers and Roller Handle Frame Size 32-50 CmUsed to r...

56 CM Notched Leveller is fitted with clamps to hold exchangeable toothed blades.The notched leveller can be handheld and used as an adhesive spreader. FeaturesNotched Leveller, including 2 S6 bladesWidth: 56 cm/ 22"Handle: untreated wooden handle and drill holes for stick holder (stick not included)Tool body: Stainless SteelBlade: fitted with clamps to hold exchangeable toothed blades2 x 22" Tooth Blades Included S6-56 Special Hardened Steel BladesProfessional ToolDurableProduct ...

16" Standard Pin Leveller is a small rake made of extruded aluminium with height adjustable metal blades that allows a coating thickness of up to 10 mm. It is designed for flooring contractors.40 cm Pin Leveller is ideal for smaller projects or difficult to reach places, where the application of the self smoothing epoxies, polyurethanes, latex or levelling compounds is required.FeaturesStandard Pin LevellerWidth: 40 cm/ 16"Own Weight: 0.7 kgMaterial: aluminiumBlade: height adjusta...

20" Spiked Aeration Roller with 11 mm Flexible Spikes is made of a high quality solvent-resistant polypropylene, for Ø 8 mm handle.It is used to release air bubbles from epoxy and polyurethane coatings and self-smoothing compounds. FeaturesLength: 50 cm (20")Spikes: 11 mm ( 0.43")Solvent ResistantMaterial: PolypropyleneFlexiblePremium QualityWithout Handle - for Ø 8 mm handleHandle Required: Roller Handle Ø 8 mm for 25 cm Rollers and Roller Handle Frame Size 32-50 CmUsed...

50cm  Spiked Aeration Roller with Handle and Splash protection,  with 31 mm Semi-Flexible Spikes is made of a high quality solvent-resistant polypropylene.The spiked roller is used to release air bubbles from epoxy and polyurethane coatings, self-smoothing compounds and other coatingsFeaturesLength: 50 cm (20")Spikes: 31 mm Material: Solvent Resistant PolypropyleneSemi-FlexiblePremium QualityWith Handle (stick holder not included and can be purchased separately) Used to ...

56 CM Notched Levelling Scraper with 2 mm ToothingThe notched scraper can be handheld and used to apply synthetic resin coatings while standing, or as an adhesive spreader. TOOTHING in MM24679Approx. LAYER THICKNESS in MM for self smoothing mortars*0.3-1.00.5-1.51-22-33.4FeaturesNotched Levelling ScraperToothing: 2 mm Width: 56 cm/ 22"Handle: untreated wooden handle and drill holes for stick holder (stick not included)Tool body: Standard SteelProfessional ToolDurableProduct i...

56 CM Notched Levelling Scraper with 4 mm ToothingThe notched scraper can be handheld and used to apply synthetic resin coatings while standing, or as an adhesive spreader. TOOTHING in MM24679Approx. LAYER THICKNESS in MM for self smoothing mortars*0.3-1.00.5-1.51-22-33.4FeaturesNotched Levelling ScraperToothing: 4 mm Width: 56 cm/ 22"Handle: untreated wooden handle and drill holes for stick holder (stick not included)Tool body: Standard SteelProfessional ToolDurableProduct i...

Aluminium Trims - Straight Edging Profiles @ 2.5 M Length Internal Height: 2mm - 25 mm Colour: Natural AluminiumLength: 250 cm / 98"Internal Height: 2mm; 3mm; 4.5mm; 6 mm; 8 mm; 9 mm; 10 mm; 11 mm; 12.5 mm; 15 mm; 16.6 mm; 18.5 mm; 20 mm; 22 mm; 25 mmOverall Height: Internal Height + 1 mm baseUsage- Domestic and commercial projects- Interior and Exterior use.- Economical and Easy to install when a straight edge is required.- Suitable for decorative applications.- Can be used to sepa...

Pole Holder with Knee | Rake Handle Holder allows the use of telescopic handle with certain rake frames and pin levellers. FeaturesConnection between certain rakes, pin rakes and pin levellers and the pole/ stickWeight: 0.15 kgMaterial: metalStick Handle in combination with a rakes, pin levellers  used for the application of:- Epoxy Coating- Self Levelling compound etc.Contact Us TODAY for technical support....

I Tools 56cm Compound Leveller is a multi purpose trowel, mainly used for the application of levelling compoundsIt can also be used to apply adhesives or epoxy resins over larger areas. A pole/ handle can be attached to make the application process easier whilst still standing upright.I Tools Pole and Mount can be purchased separately. Click the blue Link...

I Tools Compound Leveller Blades to fit the I Tools Compound Leveller  56cm One Pack contains 10 blades....

I Tools Pole and Mount suitable to be used with I Tools Pin Leveller and I Tools Compound Rakes....

Pajarito 4680 Pin Leveller is a 0.6mm thick hardened polished band of steel 600mm wide and 100mm high.It has two variable pins to enable adjustable settings for an even spreading of levelling compounds. It is able to apply a screed depth between 6mm to 13mm depth. Constructed with an angled steel mount to accept a telescopic pole, wooden or steel shaft handle....

Pajarito 677 Pin Leveller is designed to assist with the accurate installation of levelling compounds. Pins mounted onto the base plate allow for the change in screed depth required adjusted from 06mm to 30mm....

Smoothing Compound Rake 56cm...

I Tools Pin Leveller used to apply a thicker levelling compound or screed with fibres. The Pin Leveller has a width of 60cm and can be adjusted from 0mm up to 40mm deep. Has been developed so a pole can be attached for ease of use.I Tools Pole and Mount can be purchased separately on item 1916 or click the blue link....

Wolff 10415 18v Cordless Mixer Only Flexible 2-speed mixer that can be used independently of the mains supply thanks to battery operationFor mixing levelling and stable levelling compoundsFor mixing applications up to 30 kgRobust 2-speed gearbox: for material-specific speeds and a strong torque in 3 adjustable maximum speedsComfortable 3-step switch accessible from handle position without interruption of work, step 1: clean, step 2: stir, step 3: stirfull wave electronics: soft start, ...

Wolff 13658 Pin Leveller Used for the application of smoothing compounds. Supplied complete with a mounting sleeve for a handle or telescopic pole, angular steel mounting plate with changeable steel blade, 100mm high and 0.60mm thick. It has two thick adjustable pins to aid in the level adjustment and depth of screed required. Depth that can be adjustable from 6mm to 30mm and has a working width of 800mm....

Made to apply smoothing compounds. Complete with a wooden handle mount. Has a working width of 56cm. Rake inserts can be inter changeable depending on depth required.Features:Can be used while standingMount for wooden handle to work while standingWorking width, 56 cmIncludes rake insert with R2 notch56cm Rake Blades can be purchased separately ...

Wolff 56203 28cm Finishing Trowel is made from a carbon steel narrow blade which reduces drag and has a comfortable bi component handle.Smoothing Trowel Dimensions: 280 x 135mm...

Wolff 65501 Smoothing Compound Rake 56cm including HandleOffers working uprightSpecial articulation imitates movement of the handFast cleaning by special designIncludes:Blade holder 56 cm, telescopic handleAccessories:Blade holder 56 cmTelescopic handle...

Wolff 65503 Large Area Rake 60cm including HandleOffers working uprightSpecial articulation imitates movement of the hand2 adjusting pins for positioning of the heightIncludes:Pin leveller (blade and pins) 60 cm, telescopic handleAccessories:Pin leveller (blade and pins) 60 cm#65504Telescopic handle#65497Spare pins#65505...

Wolff Spike Roller used to air-rate water based screeds and remove trowel lines in application. Roller can be chosen in different pin lengths.Working width 75 cm Pin length 11 mm  Pin length 21 mm Pin length 31 mm...

Wolff Mixing Station 75ltr is ideal for mixing of powder products, like levelling compounds (up to 3 bags)FeaturesSpecial 2 stop tip systemPerfect fitting toolsSuitable for all kind of stirring machines Includes:Base frame stirring station 75l, Holding device stirring station 75l, Stirrer stirring station 75l, Mixing bucket stirring station 75l, Hose holder stirring station 75l Accessories:Base frame stirring station 75l #65841Holding device stirring station 75l #65491&n...

Aluminium Edging Profile SAMPLE Only - Straight Edging Profiles @ 10 cm  Internal Height: 2mm - 25 mm Colour: Natural AluminiumInternal Height: 2mm; 3mm; 4.5mm; 6 mm; 8 mm; 9 mm; 10 mm; 11 mm; 12.5 mm; 15 mm; 16.6 mm; 18.5 mm; 20 mm; 22 mm; 25 mmOverall Height: Internal Height + 1 mm baseThis is a Sample only. Full length of 250 cm can be purchased separately. Usage- Domestic and commercial projects- Interior and Exterior use.- Economical and Easy to install when a straigh...