Resin Pigment - Light Grey RAL7035 1 kg
OverView
Epoxy resin pigment in RAL 7035 Light greyEpoxy resin pigment in RAL 7035 Light grey
Opaque Resin Pigments are used for the pigmentation of clear epoxy resins, acrylic resin coatings as well as mortar coatings. The epoxy resin pigments come in a range of 12 standard colours.
Colouring the epoxy primer and base is mainly required to provide the installer with visual control of coverage uniformity.
When installing a metallic epoxy system it is always effective to have a unicolour base for the design metallic coat. The epoxy pigment can be mixed with a clear epoxy to achieve a uniform, colour block base for the following decorative coats.
The most popular base colours are black, dark grey and light grey.
Addition of 3 - 10 % on resin, depending on the system and requirements.
At the average consumption of 5% pigment to the resin, the 1 kg unit would be enough to colour 20 kg of clear epoxy binder or clear epoxy primer when a solid pigmentation is required.
Features:
Consumption 3-10% pigment on resin, depending on the requirements The most commonly used rate is 5:100 (pigment: resin), which is 5% pigment added to clear resin. 1 kg can be mixed with up to 30 kg of epoxy, depending on the required consistency. *When mixing metallic pigments or solid pigments with clear epoxy, tests are recommended prior to application on site. Packaging
Recommended Uses - Homes (floors, worktops, wall panels, artwork, tables etc), - Commercial Units: shopping centres, clubs, showrooms, offices - Garage epoxy flooring systems. |
3D Metallic Pigment Epoxy System Epoxy Resin Flooring |
Related Products
Epoxy Primer EP20-M 10 kg (for Metallic Systems)
EP20-M Prime is a 2-component, solvent-free, epoxy resin primer and scratch coat. It is mainly used as a primer for decorative systems like metallic and 3D flooring, or for polyurethane resin systems.EP 20-M Epoxy Primer can be used as a bonding layer for most of our resin flooring systems.UsageSuitable for use as a low viscosity epoxy primer on cement and plaster bonded substrates. EP20-M Prime can be applied to weak and porous substrates creating a high strength substrate prior to the appl...
8mm Pile Premium Lint-Free Roller Cover 25cm
Premium Nylon Top Coat Epoxy Lint-Free Roller Cover 8 mm is a short pile and solvent resistant roller cover designed for the application of all floor coating including epoxy and polyurethane topcoats. It is mainly suitable for Water-based Polyurethane topcoats on resin floors and microcement finishes.8 mm Flooring Roller Cover will leave free of roller marks surfaces.*FeaturesLength: 25 cm (10")Pile: 8 mm (0.3")Core Ø 48 mmSolvent ResistantFuzz-free / lint-freeBoth ends are bevelled&nb...
Metallic Pigments for Epoxy Resin - BRUSHED STEEL 50, 100, 250 grams
Brushed Steel Metallic Pigments are ONE OF THE MOST POPULAR metallic shades in a silver grey colour. The metallic epoxy pigments are unique colour powders designed to be field blended with a 100% solids clear epoxy binder to create pearlescent and iridescent effects that mimic the natural look of stone and rock formations. Brushed steel metallic pigment shade is a very popular colour, reminding the colour of the concrete. The concrete effect floors are very much in trend at present and usin...
Metallic Pigments - INTENSE SPARKLE WHITE 50, 100, 250 grams
Intense Sparkle White Metallic Pigments are VERY glittery pearlescent colour powders designed to be mixed with a clear epoxy resin to create sparkly pearlescent and iridescent effects that mimic the natural look of stone and rock formations. Pearlescent shades metallic pigments are the most popular metallic epoxy coatings for floors and furniture.Due to its neutral silvery light shade, it can be applied on darker or lighter epoxy base coats, or even directly on concrete ...
Epoxy Pigment - Slate Grey RAL7015 1 kg
RAL7015 Slate Grey Opaque Resin Pigments are used for the pigmentation of epoxy resins, acrylic resin coatings as well as mortar coatings. The powder pigment can be added to resins in a proportion of 3-8% to get consistent coloured epoxy resin. The epoxy pigments come in a range of 12 standard colours. Storing the solid pigment only is a cost-effective way to always have a stock of different colours of epoxy pigments, instead of holding the big drums of epoxy in various colours. Colour...
Short Pile Radiator Rollers 8mm Pile Set of 10
Fuss-free Nylon 4" Radiator Roller Cover 8 mm is a solvent resistant roller cover designed for the application of epoxy and polyurethane top coats, or paints around the perimeter or in difficult to reach places.FeaturesRoller Cover (Mini roller holder not included)Length: 100 mm (4")Pile: 8 mm (0.3")Solvent ResistantFuzz-free10 cm Roller - Core Ø 17 mmWill not leave roller marks when applied as per each product's data sheet instructions.Perfect for applications of topcoat, when a lint-free,...
50 CM PREMIUM Short Pile Epoxy Roller Cover 8mm Pile
Short Pile Premium Top Coat Roller Cover is a lint-free, 8 mm pile and solvent resistant roller cover designed for the application of all floor coating including epoxy and polyurethane topcoats. 50 cm Nylon Roller Cover is suitable for larger flooring surfaces. It will leave free of roller marks finishes.*FeaturesLength: 50 cm (20")Pile: 8 mmSolvent ResistantFuzz-free50 cm Roller - Core Ø 48 mmWill not leave roller marks when applied as per each product's data sheet instructi...
Professional Spiked Shoes - Shoe IN PRO Spike Size M (UK <8 or EU <42)
Shoe In Spiked Shoes are high quality professional spiked shoes designed specifically for flooring contractors. The spiked shoes are very safe, with great stability. They are robust and long lasting.The spiked shoes are ideal for the application of epoxies, polyurethanes, self levelling compounds and self levelling screeds.FeaturesSize: the most commonly used are the size L which fits sizes UK less than 8, or EU <42Spikes: sharp. Each shoe is secured with 16 spikes.Advantages...