Metallic Pigments Epoxy System


If you are looking for a Unique and Unduplicated seamless flooring design then the Metallic Pigment Epoxy System is the one you need to consider.

Bold, versatile and so beautiful – there are many words to describe the metallic special epoxy coating. 

Metallic Pigments Epoxy System comes in a range of standard colours which combined create pearlescent and iridescent effects that mimic the natural look of marble and rock formation. 

High Gloss, Matt and Mirror Effect finishes give the floor a vibrant chic look.


Recommended substrates are concrete, anhydrite and sand cement screeds, levelling compound.*


System Build: 

1. EP20-RFL Prime or EP27-RFL Damp Proof Prime at 0.25-0.35kg/ m2 (refer to TDS). You may add Solid Epoxy Pigment to colour your primer.

2. (Optional) Scratch coat for porous substrates.

3. EP1160-M-Epoxy Body Coat coverage 0.6 to 1.5Kg / m2

4. EP308-EP Clear Seal at coverage 0.8 to 1.5Kg / m2 + 3D Metallic Pigment @ 25gr / kg.

7. (Optional) PU3001 Matt Urethane coverage rate 0.12-0.16kg/ m2 (refer to TDS).


Metallic System Build Up

SUBSTRATE

Primer

EP20 M Epoxy Primer

EP27 Damp Proof Primer

RS EP22 Fast Set Primer

 

150 – 250 g/m2

Scratch Coat (optional)

EP20 mixed with Scratch Coat Filler

800 – 1000 g/ m2

Colour Base Body Coat

EP1160 M - Epoxy Body Coat

600 - 1500 g/ m2

Metallic Coat

EP308-Clear Epoxy Resin mixed with 3D Metallic Pigments

1100 – 1600 g/ m2

25 g/1 kg EP308

Top Coat (optional for a satin matt finish)

PU3001 Matt Clear Sealer


100 – 150 g/m2

Applied in one or two coats