Anti-Slip Beads for Top Coats 250μm - 425μm

£24.43 Ex VAT
Product Code: T1088
Availability: 100


Anti-Slip Beads 250μm-425μm are fine to medium sized white polymer granules for the creation of a transparen...

Available Options

Anti-Slip Beads 250μm-425μm are fine to medium sized white polymer granules for the creation of a transparent slip resistant surface in combination with Clear Epoxy Coatings and Sealers

Polymer Anti-Slip Beads are suitable for the application with the following coatings:

  • Epoxy coating 
  • Polyurethane coating
  • Floor paints
  • Microcement topcoat


  • Colour: white, which becomes transparent in clear sealers
  • Colour in dispersion: transparent. In a clear coating system, they will not discolour or distort any graphics or patterns.
  • Durable.  Polymer Beads impart improved durability when used in clear coating systems formulated with acrylic, epoxy, polyester gel coats, polyurethanes and UV-curable coatings.
  • Lightweight. When replacing a mineral anti-skid additive with Polymer Beads it is possible to reduce the weight of a coating by up to 50%, offering cost reduction in transport and weight reductions of the finished articles


Slip Resistant Medium Aggregates are polycarbonate beads with reactive sites which allow forming a copolymer matrix with epoxies, urethanes, polyesters and acrylics.

Polymer Beads are most commonly used as an anti-slip additive, as they stay suspended in the resin. They are also used in UV-curable resins and fillers where clarity needs to be maintained.

Anti-slip aggregates may be used in combination with Toppus following coatings:
  • PU3001
  • PU3116
  • Low viscosity roller applied Epoxy coating


  • 500 gram 
  • 1000 gram
  • 5000 gram


Standard Mixing rates for Polimer Beads/ Resin - 1:10 (10 % polymer beads to the quantity of resin).

How much Polymer Beads to use depends on which particle size you select, the thickness of your film and the type of resin being used. 

A test is recommended prior to applying on site.

Application method

  • Broadcast into wet resin – This method is used for large areas, such as floors
  • Formulated into resin – For application as a pre-mixed product
  • Separate component – Added into the resin and mixed on site

3D Epoxy Flooring 

3D Metallic Pigment Epoxy System

Polyurethane Resin Flooring

Epoxy Resin Flooring

Comfort Flooring

Write a review

Please login or register to review