Transition Bar with NO Visible Screws 270 cm
- 3 or more £20.40
- 10 or more £17.75
OverView
Extra Long Flooring Transition Bars for different floor heights from 0 to 14 mm, 270 CM/ 106" Length x 40 mm Width TRANS...Extra Long Flooring Transition Bars for different floor heights from 0 to 14 mm, 270 CM/ 106" Length x 40 mm Width
TRANSITION Bars with NO VISIBLE Dowel/ Screw Fixing Aluminium Anodised Profile, 270 CM, supplied in various colours, and can be cut to the required length.
The transition strips are suitable for various floors with the same or different heights from 0-14 mm.
The attachment to the substrate is carried out by means of flexible lamellar dowels.
Product: MultiFloor Transition Bar
Material: Aluminium Anodised
Length: 270 CM/ 106" - can be cut to match the required length
Width: 40 MM
For Same or DIFFERENT Floor Heights/ Levels: 0-14 mm
Colours: Aluminium Anodise Silver, Champagne, Titanium
Fixing: Dowels x 42 mm for drills Ø 6.0 mm - Can also BE PURCHASED SEPARATELY. 3 SETS ARE RECOMENDED FOR LENGTHS OF 270 CM
Fixing Transition bar strips are clipped onto plastic plugs inserted into pre-drilled holes at random intervals. Profiles automatically adapt to the height of the flooring without any need for fine adjustment. The plastic plugs are flexible enough to compensate for height differences in optimum fashion. The profiles themselves lay very flat and harmoniously match heights with different flooring, e.g. at junctions between two flooring materials in a doorway. The smooth surface of the profiles without unaesthetically visible screws provides the perfect edging for any floor. Transition Bars are also available with self-adhesive backing to eliminate need for plastic plugs. Transition Bars Fixing Instructions Usage MultiFloor Transition Bars are perfect as a transition bar between:
Installed to adjust the different floor levels of 0-14 mm, or for the same levels, used as an elegant transition bar.
Maintenance
Aluminium Anodised Threshold Bars require no specific maintenance. Any dirt can be removed using normal cleaning materials. However, the cleaning materials must be free of hydrochloric or hydrofluoric acid, and should not scratch the surface. Features once installed
Contact Us TODAY for technical support. |
Downloads
3D Epoxy Flooring
Metallic Pigment Epoxy System
Polyurethane Resin Flooring
Epoxy Resin Flooring
Comfort Flooring
LENGTH | |
270 CM/ 106" | |
MATERIAL | |
Aluminium | |
WIDTH | |
40 MM |
Related Products
Aluminium Anodised Stair Nosing 2.5 LM with 13 mm insert AA139
Aluminium Anodised Stair Nosing Profiles AA139 are stair tread profiles design to hold 13 mm wide, different colours and textures safety inserts for retrofitting on all stair coverings. Aluminium stair nosing profiles are perfectly designed for steps covered with resin finish, micro cement, tiles, wood, laminate and vinyl. FeaturesMaterial: Aluminium AnodisedColour: SilverFixing: AA139 nosing profiles can be screwed or gluedLength: 2.5 metresHeight: 9 mmWidth: 28 mmReq...
Aluminium Anodised Stair Nosing with 2x13 mm inserts AA221 2.5 LM
AA221 nosing profiles are the stair tread profiles made of aluminium for holding the different colours and textures 13 mm safety inserts for retrofitting on all stair coverings. Aluminium stair nosing profiles are perfectly designed for steps covered with epoxy resin, microcement, tiles, wood, laminate and vinyl. FeaturesMaterial: Aluminium AnodisedColour: SilverFixing: AA221 nosing profiles can be screwed or gluedLength: 2.5 metresHeight: 24 mmWidth: 50...
Aluminium Anodised Stair Nosing with 13 mm insert AA140 2.5 LM
AA140 nosing profiles are the stair tread profiles made of aluminium for holding the different colours and textures 13 mm safety inserts for retrofitting on all stair coverings. Aluminium stair nosing profiles are perfectly designed for steps covered with epoxy resin, microcement, tiles, wood, laminate and vinyl. FeaturesMaterial: Aluminium AnodisedColour: SilverFixing: AA140 nosing profiles can be screwed or gluedLength: 2.5 metresHeight: 4 mmWidth: 28 mmReq...
Aluminium Movement Joint Various Heights and Colour Inserts; 2.5 LM
High Quality Aluminium Movement Joints for Resin Flooring, Resin Bound, Stone Carpet, Epoxy and Polyurethane screeds, Cement-based floor finishes, or Tiles and Wood. Colour: Natural Aluminium, powder-coatedLength: 2.5 Linear metresInternal Height: 6-25mmOverall Height: 7-26 mmInsert material: Infill epoxy compound in various coloursInsert width: 6 mmInserts colours: Various Colours - Standard, the most popular colours, and other RAL colours produced upon r...
3 Mm Stainless Steel FORMABLE Trims For Resin Flooring And Microcement 2.5 Lm
2.5 LM Stainless Steel Formable Edge Profile Trims at only 3 mm for Resin and Microcement finishes.These are the perfect height flooring trims suitable for poured seamless floors.It will leave a net thin up to 2 mm visible line at the top of the floor.Colour: Natural Stainless Steel - FormableLength: 2.5 metresGrade: 304Internal Height: 3 mmOverall Height: 4 mmUsage- Flexible edging profiles for microcement, resin flooring, or epoxy coating finishes.- Perfect for projects wit...
DIY Door Threshold Bar | NO Visible Screws 30 MM x 90 CM x 0-9 mm Floor Heights
DIY 30 MM Door Threshold Bar Strips for different floor heights from 0 to 9 mm, 90 CM Length TRANSITION Bars with NO VISIBLE Dowel/ Screw Fixing Aluminium Anodised Profile, DIY Pack - 90cm, supplied in various colours.Multi-floor transition bar is the floor profile system made of aluminium with invisible fastening for all living room coverings from 0-14 mm. With its smooth surface and numerous decors, it is particularly suitable for covering expansion joints or floor coverings of the same...
DIY Door Bar | NO Visible Screws 40 MM x 90 CM x 0-14 mm Floor Heights | Various Colours
DIY 40 MM Door Bars Strips for different floor heights from 0 to 14 mm, 90 CM Length TRANSITION Bars with NO VISIBLE Dowel/ Screw Fixing Aluminium Anodised Profile, DIY Pack - 90cm, supplied in various colours.Multi-floor transition bar is the floor profile system made of aluminium with invisible fastening for all living room coverings from 0-14 mm. With its smooth surface and numerous decors, it is particularly suitable for covering expansion joints or floor coverings of the same height ...
Stainless Steel Trims 250CM
High-Quality Stainless Steel Trims - Straight Edging Profiles for Resin Floors, Microcement, tiling, laminate, wood or other types of floors.Colour: Natural Stainless SteelLength: 2.5 metresGrade: 304Internal Height: 2mm; 3mm; 4.5mm; 6mm; 8mm, 9 mm, 10 mm, 11 mm, 12.5 mm, 15 mm, 16.5 mm, 20 mm, 22 mm, 25 mm, 30 mmOverall Height: Internal Height + 1 mm baseUsage- Domestic and commercial flooring projects- For epoxy and polyurethane resin finishes as an edge trim, to separate two diffe...
Stainless Steel Trims SAMPLE
Sample of Stainless Steel Trims at various heights.Straight Edging Profiles for Resin Floors, Microcement, tiling, laminate, wood or other types of floors.Colour: Natural Stainless SteelLength: about 10 cmGrade: 304Internal Height: 2mm; 3mm; 4.5mm; 6mm; 8mm, 9 mm, 10 mm, 11 mm, 12.5 mm, 15 mm, 16.5 mm, 20 mm, 22 mm, 25 mm, 30 mmOverall Height: Internal Height + 1 mm baseCan be purchased separately at 250 cm lenghts.Usage- Domestic and commercial flooring projects- For epoxy and p...